CHUNKANGStainless steel & non-ferrous metals · Shandong, China
Home / Products / Sheet and plate

Stainless steel sheet and plate

Cold rolled sheet, hot rolled plate and coil in grades 201, 304/304L, 316/316L, 321 and 310. Thickness from 0.01 mm foil to 500 mm plate, width up to 2,500 mm, cut to length on ten coil lines.

Specification

ParameterRange
Thickness0.01 mm – 500 mm
Widthup to 2,500 mm
LengthCut to length from coil, or fixed plate sizes
Finishes2B, BA, No.4, hairline, 8K mirror
StandardsASTM A240, A480; EN 10088-2
ToleranceASTM A480 (thickness, flatness, width)
EdgeMill edge or slit edge, deburred on request

Choosing a finish by what it has to survive

FinishSurfaceUse it for
2BCold rolled, annealed, pickled, skin passedGeneral fabrication, tanks, machine guards
BABright annealed, reflectiveFood contact, architectural, visible panels
No.4Brushed, short linear grainKitchen equipment, lift panels, shopfitting
HairlineLong fine grainAppliance fronts, column cladding
8KMirror polishedDecorative, signage, sanitary ware

Thickness tolerance is where sheet disputes come from

A 3 mm sheet that measures 2.85 mm is within ASTM A480 tolerance for that thickness and width, and it is also 5% less steel than you paid for. On a container of plate, that difference is the whole margin. We state the permitted deviation on the quotation and the measured values on the inspection record, so the argument cannot happen after arrival.

Packing

Questions about sheet and plate

What is the thinnest sheet you supply?

0.01 mm foil, produced by rolling rather than slitting. Below about 0.3 mm, handling and packing dominate the cost, so ask for a quote rather than assuming a coil price per tonne.

Can you supply 1,500 mm wide coil?

Yes, up to 2,500 mm width depending on thickness. Narrow slit coil and strip are cut on the same lines.

Do you supply to ASTM or EN?

Both. ASTM A240 / A480 is standard for North American buyers; EN 10088-2 for European specifications. The certificate names the standard used.

Is the plate supplied with a mill test certificate?

Yes, EN 10204 3.1 with heat number and mechanical properties, plus the RoHS verification for the plate line, certificate CTGS2604010066R.

Can you protect the surface for visible applications?

Yes — PVC film or interleaved paper. Tell us the application, because film choice depends on whether the part will be laser cut, bent or welded afterwards.

Send a sheet specification