CHUNKANGStainless steel & non-ferrous metals · Shandong, China
Home / MOQ & samples

Minimum order quantity and samples

The minimums published on our Alibaba listings run from 1 kg on selected stock items to 1 t on coil and plate. Nothing here requires a container. What actually limits a trial order is freight economics, not a policy number.

Published minimums by product form

ProductPublished minimum (stock)Made-to-order
Sheet, selected items1 kg500 kg – 1 t depending on grade and thickness
Pipe and tube, selected items1 kg – 100 kg1 t, or mill run per size and grade
Bar, selected items1 kg – 100 kg1 t, heat lot
Coil and plate500 kg – 1 tFull coil or plate lot
Copper tube100 kgMachine run

Treat this as a range, not a promise: the same item can sit in either column depending on grade, thickness, surface and whether it comes from standing stock. Ask for the specific item and you will get the specific number — we do not pad a minimum to push you into a bigger order.

How samples work

CaseSample costCourierCredited against the bulk order
Stock size, standard gradeFreeBuyerNot applicable
Custom grade or non-stock sizeChargedBuyerYes, on the bulk order

Every sample ships with its heat number and mill test certificate, so you can send it to a lab or run PMI on arrival without asking us for paperwork afterwards. If the sample fails your check, we would rather know before the container is booked.

How a trial order works

  1. Send grade, size, quantity and destination — not a general enquiry
  2. We quote stock availability and the smallest workable lot for that item
  3. Sample ships from stock, with heat number and MTC
  4. You approve, then we invoice against the agreed deposit
  5. Inspection is booked if you want it, and the balance releases against documents

Several sizes can be combined into one lot. That is usually how a first order becomes economic: not by cutting the quantity, but by filling the freight with the sizes you actually need.

Questions buyers ask about MOQ and samples

Can I buy 1 kg of stainless sheet as a sample?

On selected sheet items, yes — 1 kg is a published minimum on our listings. It will be a cut piece, not a full sheet, and it ships with the heat number and MTC.

Do you sell to small businesses and startups?

Yes. A first order does not need to be a container. It needs to be worth the freight, which for most destinations means a few hundred kilograms rather than a full 20-foot load.

What is the smallest trial order you accept?

It depends on the item: 1 kg on selected sheet, pipe and bar, 100 kg on tube and flat bar, 500 kg to 1 t on coil and plate. Ask for your specific size and grade.

Are samples free?

Stock sizes in standard grades are free; the buyer pays the courier. Custom grades and non-stock sizes carry a sample charge.

Is the sample charge refunded?

Yes — a charged sample is credited against the bulk order for the same item.

Who pays the courier?

The buyer, on both free and charged samples. Courier is a real cost and bundling it into the sample price would just hide it.

How long does a sample take to reach the US?

Dispatch is the variable part: stock samples leave quickly, custom samples wait for a production slot. Transit is typically a few business days by express courier. Ask for the dispatch date rather than a total.

Can I mix several sizes in one trial order?

Yes. Combining sizes is the normal way to make a first order economic, and it does not change the per-item minimums.

Is there a minimum for cut-to-length material?

Cutting is quoted on the quantity being cut. A single length is possible from stock; a production cutting run is priced per tonne or per cut.

Can I order one length of pipe to test weldability?

Yes from stock in standard grades. It ships with the heat number so your welder's result can be tied back to a specific heat.

What is the MOQ for 904L plate?

904L is made to order rather than stocked, so it is quoted against the mill run for that plate size. Ask for the current mill schedule before planning around it.

Do you accept orders below one tonne for copper tube?

Yes — 100 kg is a published minimum on copper coil items.

Can I combine sheet and bar in one shipment?

Yes. Mixed loads are routine; the packing list separates them by item, grade and heat number.

What is the minimum for private-label stainless products?

It depends on the product and the marking. Private label adds a marking and packing step, so the minimum is set by that step rather than by the steel.

Can I place a sample order through Alibaba?

Yes. Trade Assurance covers sample orders as well as bulk orders, which is often the simplest way to pay for a first trial.

Can the sample come from the heat I will receive?

Ask for it explicitly. Stock samples come from current stock; if you need the sample drawn from the production heat, that has to be booked with the order.

What paperwork comes with a sample?

Mill test certificate to EN 10204 3.1 with the heat number, plus the packing list. Commercial invoice and certificate of origin come with the shipment, not the sample.

Is there a setup fee for a custom size?

Not as a separate fee — a non-standard size is priced into the mill run for that size. What you pay is the mill-run quantity, not a tooling charge.

Do you support repeat small orders instead of one large one?

Yes, and for a first-year buyer it is usually the better structure: smaller lots, more frequent inspection, less capital tied up. The per-tonne price is higher than a single large lot.

How long is a quotation valid?

Each quotation carries its own validity date, usually set by the alloy surcharge. Beyond that date we re-quote rather than hold a number the market has moved past.