CHUNKANGStainless steel & non-ferrous metals · Shandong, China
Home / Pricing

How a stainless steel price is built

A stainless steel price is four numbers added together, and only one of them is the metal. If a quote arrives as a single figure per tonne, you cannot tell whether you are comparing material, machining, tolerance or freight — which is why two quotes for the same grade can differ by 40% and both be honest.

The four lines every quotation should show

LineWhat it coversWhat moves it
Alloy surchargeNickel, chrome and molybdenum contentLME nickel and chrome; 304 holds about 8% nickel, 316 about 10–12%, 904L more again — so 316 and 904L react harder to a nickel move than 304
Form and finishCasting, rolling, pickling, annealing, polishing2B is the mill default; BA, No.4 and mirror add passes; a polished tube costs more than a pickled one of the same size
Size and toleranceNon-standard OD, wall, length, tighter toleranceOff-standard sizes need a mill run; holding ASTM A999 or EN 10216-5 tolerance to a tighter class adds sorting and rejection cost
Packing and deliveryExport packing, inland haulage, ocean freight, dutyFOB, CIF and DDP are three different prices for the same steel — never compare across Incoterms

Ask for the four lines separately. A supplier who can only give one number is either reselling someone else's quote or hiding the margin in the freight line.

Why 316 costs more than 304, in one paragraph

304 carries roughly 18% chromium and 8% nickel; 316 carries 16–18% chromium, 10–12% nickel and 2–3% molybdenum. Nickel and molybdenum are the expensive alloying elements, and molybdenum is the scarcer of the two. That is why the gap between 304 and 316 widens when nickel and moly prices rise, and narrows when they fall. It also explains why 904L, which adds substantially more nickel and molybdenum, is priced in a different bracket again.

How to compare two quotes that look different

CheckWhy it changes the price
Grade and standard304 to 316 or ASTM to EN is not a like-for-like swap
Tolerance classA999 and EN 10216-5 permit different wall deviation; a tighter class costs more
Finish2B, BA, No.4, mirror — each adds a pass
Length and cuttingRandom lengths are cheapest; fixed cut lengths add a cutting line
IncotermFOB, CIF and DDP differ by freight, insurance and duty; state the port or address
Quantity basisStock lot versus mill run changes the per-tonne price at the same grade

Normalise all six, then compare. In practice, most "cheaper" quotes turn out to be a different standard, a looser tolerance, or a price that excludes freight and duty.

What we will not do

Send the specification and destination and you will get the four lines separately, with the validity date on the quotation. If the nickel market moves past that date, we re-quote rather than surprise you at shipment.

Questions buyers ask about price

How is the price per tonne of 304 sheet calculated?

Four components: the alloy surcharge for the nickel and chrome content, the rolling and finishing cost, any non-standard size or tolerance premium, and packing plus delivery to your Incoterm. Ask for them separately so you can see which one is moving.

Why is 316 more expensive than 304?

316 contains 10–12% nickel plus 2–3% molybdenum against roughly 8% nickel in 304. Molybdenum is the scarcer addition, so the price gap widens when nickel and moly rise.

Is it cheaper to buy from China or from a US distributor?

It depends on volume and urgency, not on origin. A US distributor sells you a small quantity tomorrow out of stock; an import needs a minimum volume, 3–7 days to dispatch from our warehouse and 2–4 weeks of ocean transit. Below a few tonnes, the distributor usually wins on landed cost.

How much does cut-to-length add?

A separate line, quoted per tonne or per cut depending on quantity. Random mill lengths are the cheapest option; fixed lengths add a cutting operation and yield loss.

Does polishing add much to the price?

It depends on the finish. 2B is the mill default and carries no premium; BA, No.4 and mirror each add passes, and mirror is the most expensive because rejects are visible.

How do I work out landed cost?

FOB price plus ocean freight plus insurance plus duty plus customs brokerage plus inland delivery to your door. Ask us for CIF and DDP for the same lot and compare the two — the difference is what the freight and duty actually cost you.

Are there hidden costs in a CIF quote?

CIF covers freight and insurance to your port, not destination charges, customs clearance, duty or inland haulage. Those are yours. A DDP quote bundles them, which is why it looks higher.

Why did my price change between quotation and order?

Usually the alloy surcharge — nickel moves weekly — or the specification shifted between the enquiry and the order. Every quotation carries a validity date; ask what it is before you plan around the number.

What deposit is normal?

A deposit with the balance released against inspection documents is the market default. The split is agreed per order; what matters is that the balance is still in your hands when the inspection report arrives.

What is the cheapest grade for indoor frames?

201 or 304, depending on the environment. 201 is cheaper and adequate indoors and in dry conditions; it has less nickel and corrodes sooner than 304 in damp or coastal air. Saving on grade only works if the service environment is genuinely mild.

How much does third-party inspection add?

The agency's man-day rate plus travel, invoiced by the agency. It is a fixed cost per inspection rather than a percentage, so it hurts small lots more than large ones — another reason trial orders are priced differently.

Is it cheaper to buy coil and cut it myself?

Only above a certain volume. Coil is cheaper per tonne, but you carry the slitting and cut-to-length cost, the yield loss and the storage. For a few tonnes a month, buying cut sheet is usually cheaper overall.

Do you charge for a mill test certificate?

No. EN 10204 3.1 certificates are issued with the shipment as standard.